Mutqinin Course

Alex Price Alex Price

0 Course Enrolled • 0 Course Completed

Biography

NSE8_812 Training Materials | NSE8_812 Test Cram Review

P.S. Free & New NSE8_812 dumps are available on Google Drive shared by Braindumpsqa: https://drive.google.com/open?id=1DH_r1oBMSGjFP8NgQQbJV4nSOHPLG_i3

Our Fortinet NSE8_812 exam guide has not equivocal content that may confuse exam candidates. All question points of our Fortinet NSE 8 - Written Exam (NSE8_812) NSE8_812 study quiz can dispel your doubts clearly. Get our Fortinet NSE 8 - Written Exam (NSE8_812) NSE8_812 Certification actual exam and just make sure that you fully understand it and study every single question in it by heart.

Our Braindumpsqa provides the latest and the most complete NSE8_812 exam questions and answers aimed at becoming the most reliable dumps provider in IT exam software. With the help of our Braindumpsqa, nearly all those who have purchased our dumps have successfully passed the difficult NSE8_812 Exam, which gives us great confidence to recommend our reliable products to you. We can assure you that we will fully refund the cost you purchased our dump, if you fail NSE8_812 exam with our dumps. So, just rest assured to prepare for your exam.

>> NSE8_812 Training Materials <<

NSE8_812 Test Cram Review - Exam NSE8_812 Simulator Online

If you compare the test to a battle, the examinee is like a brave warrior, and the good NSE8_812 learning materials are the weapon equipments, but if you want to win, then it is essential for to have the good NSE8_812 Study Guide. Our NSE8_812 exam questions are of high quality which is carefully prepared by professionals based on the changes in the syllabus and the latest development in practice.

Fortinet NSE8_812 certification is the highest level of certification offered by Fortinet, and it is designed to recognize individuals who have achieved the highest level of expertise in Fortinet products and technologies. Fortinet NSE 8 - Written Exam (NSE8_812) certification exam covers a wide range of topics, including network security architecture, advanced threat protection, network security operations, and cloud security. NSE8_812 Exam is designed to test the candidate's knowledge and skills in these areas, as well as their ability to apply them to real-world scenarios.

Fortinet NSE 8 - Written Exam (NSE8_812) Sample Questions (Q105-Q110):

NEW QUESTION # 105
Refer to the exhibit showing a firewall policy configuration.

To prevent unauthorized access of their cloud assets, an administrator wants to enforce authentication on firewall policy ID 1.
What change does the administrator need to make?

Answer: A

Explanation:
The firewall policy in the exhibit allows all traffic from the internal network to the cloud. To enforce authentication on this traffic, the administrator needs to add the auth-on-demand option to the policy. This option will force all users to authenticate before they are allowed to access the cloud.
The following is the correct configuration:
config firewall policy
edit 1
set srcintf "internal"
set dstintf "wan1"
set srcaddr "all"
set dstaddr "all"
set service "all"
set action accept
set auth-on-demand enable
References:
Configuring firewall authentication | FortiGate / FortiOS 7.4.0 - Fortinet Document Library Firewall policy configuration | FortiGate / FortiOS 7.4.0 - Fortinet Document Library

NEW QUESTION # 106
Refer to the exhibits.

The exhibits show a FortiGate network topology and the output of the status of high availability on the FortiGate.
Given this information, which statement is correct?

A. The cluster members are on the same network and the IP addresses were statically assigned.
B. The cluster mode can support a maximum of four (4) FortiGate VMs
C. FGVMEVLQOG33WM3D and FGVMEVGCJNHFYI4A share a virtual MAC address.
D. The ethertype values of the HA packets are 0x8890, 0x8891, and 0x8892

Answer: A

Explanation:
The output of the status of high availability on the FortiGate shows that the cluster mode is active-passive, which means that only one FortiGate unit is active at a time, while the other unit is in standby mode. The active unit handles all traffic and also sends HA heartbeat packets to monitor the standby unit. The standby unit becomes active if it stops receiving heartbeat packets from the active unit, or if it receives a higher priority from another cluster unit. In active-passive mode, all cluster units share a virtual MAC address for each interface, which is used as the source MAC address for all packets forwarded by the cluster. References:
https://docs.fortinet.com/document/fortigate/6.4.0/cookbook/103439/high-availability-with-two-fortigates

NEW QUESTION # 107
Refer to the exhibits.
The exhibits show a diagram of a requested topology and the base IPsec configuration.
A customer asks you to configure ADVPN via two internet underlays. The requirement is that you use one interface with a single IP address on DC FortiGate.
In this scenario, which feature should be implemented to achieve this requirement?

A. Change advpn2 to IKEv1
B. Use peer-id
C. Use network-overlay id
D. Use local-id

Answer: C

Explanation:
A is correct because using network-overlay id allows you to configure multiple ADVPN tunnels on a single interface with a single IP address on the DC FortiGate. This is explained in the FortiGate Administration Guide under ADVPN > Configuring ADVPN > Configuring ADVPN on the hub. References: https://docs.fortinet.com/document/fortigate/7.4.0/administration-guide/978793/advpn https://docs.fortinet.com/document/fortigate/7.4.0/administration-guide/978793/advpn/978794/configuring-advpn

NEW QUESTION # 108
You are running a diagnose command continuously as traffic flows through a platform with NP6 and you obtain the following output:

Given the information shown in the output, which two statements are true? (Choose two.)

A. There are packet drops at the XAUI.
B. Enabling bandwidth control between the ISF and the NP will change the output
C. Host-shortcut mode is enabled.
D. Enable HPE shaper for the NP6 will change the output
E. The output is showing a packet descriptor queue accumulated counter

Answer: A,E

Explanation:
The diagnose command shown in the output is used to display information about NP6 packet descriptor queues. The output shows that there are 16 NP6 units in total, and each unit has four XAUI ports (XA0-XA3).
The output also shows that there are some non-zero values in the columns PDQ ACCU (packet descriptor queue accumulated counter) and PDQ DROP (packet descriptor queue drop counter). These values indicate that there are some packet descriptor queues that have reached their maximum capacity and have dropped some packets at the XAUI ports. This could be caused by congestion or misconfiguration of the XAUI ports or the ISF (Internal Switch Fabric). References:https://docs.fortinet.com/document/fortigate/7.0.0/cli-reference
/19662/diagnose-np6-pdq
The output is showing a packet descriptor queue accumulated counter, which is a measure of the number of packets that have been dropped by the NP6 due to congestion. The counter will increase if there are more packets than the NP6 can handle, which can happen if the bandwidth between the ISF and the NP is not sufficient or if the HPE shaper is enabled.
The output also shows that there are packet drops at the XAUI, which is the interface between the NP6 and the FortiGate's backplane. This means that the NP6 is not able to keep up with the traffic and is dropping packets.
The other statements are not true. Host-shortcut mode is not enabled, and enabling bandwidth control between the ISF and the NP will not change the output. HPE shaper is a feature that can be enabled to improve performance, but it will not change the output of the diagnose command.

NEW QUESTION # 109
Refer to the exhibit.

A customer has deployed a FortiGate 200F high-availability (HA) cluster that contains & TPM chip. The exhibit shows output from the FortiGate CLI session where the administrator enabled TPM.
Following these actions, the administrator immediately notices that both FortiGate high availability (HA) status and FortiManager status for the FortiGate are negatively impacted.
What are the two reasons for this behavior? (Choose two.)

A. The private-data-encryption key entered on the primary did not match the value that the TPM expected.
B. TPM functionality is not yet compatible with FortiGate HA.
C. The FortiGate has not finished the auto-update process to synchronize the new configuration to FortiManager yet.
D. Configuration for TPM is not synchronized between FortiGate HA cluster members.
E. The administrator needs to manually enter the hex private data encryption key in FortiManager.

Answer: D,E

Explanation:
https://docs.fortinet.com/document/fortimanager/7.4.2/administration-guide/30332/verifying-devices-with- private-data-encryption-enabled

NEW QUESTION # 110
......

Three formats of Fortinet NSE8_812 practice material are always getting updated according to the content of real Fortinet NSE8_812 examination. The 24/7 customer service system is always available for our customers which can solve their queries and help them if they face any issues while using the NSE8_812 Exam product. Besides regular updates, Braindumpsqa also offer up to 1 year of free real Fortinet NSE 8 - Written Exam (NSE8_812) (NSE8_812) exam questions updates.

NSE8_812 Test Cram Review: https://www.braindumpsqa.com/NSE8_812_braindumps.html

What's more, part of that Braindumpsqa NSE8_812 dumps now are free: https://drive.google.com/open?id=1DH_r1oBMSGjFP8NgQQbJV4nSOHPLG_i3

Alex Price Alex Price

Biography

Support